OM2612 Standard Classroom

Old-Main Standard-Classroom OM OM2612

User Device Support

Projecting via HDMI

Device List

Room PC

Operating Instructions

Power On – Press the power button.
Log in - Using your TRU Email address and Network Password

Troubleshooting

Power On – Press the power button.
Check Connections – Ensure all cables are securely plugged into the back of the computer (excluding Laptop HDMI).
Restart the PC – Windows Start Menu > Power > Restart.
- If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.

Monitor

Troubleshooting

Power On – Press the power button.
Power Room PC On – Press the power button on the Room PC.

Troubleshooting

Power On – Press the power button.
Check Connections – Ensure all cables are securely plugged into the back of the monitor (excluding Laptop HDMI).
Set Display Mode – Ensure the monitor is set to Auto Detect in display settings.
Restart the PC – Windows Start Menu > Power > Restart.
- If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.

Main Projector

Operating Instructions

Power On – Press Projector On on the Touch Panel.
Select Source:
- For Room PC, press Room PC on the Touch Panel.
- For Personal Laptop, press Laptop HDMI on the Touch Panel.
- For Document Camera, press Document Camera on the Touch Panel

Troubleshooting

Power On – Press Projector On on the Touch Panel.
Disable Mute – Turn Picture Mute off on the Touch Panel.
Select Source:
- For Room PC, press Room PC on the Touch Panel.
- For Personal Laptop, press Laptop HDMI on the Touch Panel.
- For Document Camera, press Document Camera on the Touch Panel
Adjust Display – Settings > Display > Under the Detected Displays, Change to Duplicate These Displays > Keep Changes
Restart Projector – Press Projector Off, wait 10 seconds, then press Projector On.
Restart the PC – Windows Start Menu > Power > Restart.
- If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.

Projector Screen

Operating Instructions

Move Screen – Press the arrow buttons to move the screen up and down manually
- Please note this is to only be used in the event that the projector comes on and the screen does not come down.
The location of this panel is usually on the closest wall to the instructor station, however, the location may vary depending on the room.

Touch Panel

Operating Instructions

Press the display power button
Select the source you would like to display
Other Options:
- Picture Mute – Stops displaying the screen
- Volume – Control volume level

Room Audio

Operating Instructions

Adjust Volume – Turn up the sound on the Touch Panel and Room PC.

Troubleshooting

Adjust Volume – Turn up the sound on the Touch Panel and Room PC.
Disable Mute – Turn Audio Mute off on the Touch Panel and Room PC.
Check Output – In Settings > Sound, set the output device to the designated Room Audio Device.
Check Cable – Ensure the audio cable is securely plugged into the back of the Room PC.
Restart the PC – Windows Start Menu > Power > Restart.
- If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.

Webcam

Operating Instructions

Begin Meeting – Open the video conferencing software of your choice (Zoom or Teams)
Enable Webcam in Software

Troubleshooting

Check Connection – Plug the webcam into the back of the Room PC.
Verify Detection – In Settings > Bluetooth & Devices > Devices, confirm the webcam is detected.
Select in Software – Ensure the webcam is chosen as the camera in your conferencing application.
Restart the PC – Windows Start Menu > Power > Restart.
- If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.

Document Camera

Operating Instructions

Turn on – Press and hold [Power] until green LED appears.
Turn off –: Hold [Power] for 3 seconds.
Zoom – Use control panel or remote.
Auto-Focus – Press [AF] to adjust focus.
Light – Toggle LED overhead light with [Lamp].

Troubleshooting

Restart Document Camera – Press and hold the power button for 3 seconds, press the power button again.
Select Source – press Document Camera on the Touch Panel
Check Connections – Ensure all cables are securely plugged into the back of the device (excluding Laptop HDMI).

Microphone

Operating Instructions

Press the power button

Troubleshooting

Power Cycle – Press the power button, wait 3 seconds, press the power button again

Room

Front

Instructor Station

If you still require assistance, please submit a Classroom Emergency.

0 reviews

Print Article

Updating...

OM2612 Standard Classroom

User Device Support

Device List

Operating Instructions

Troubleshooting

Operating Instructions

Operating Instructions

Operating Instructions

Operating Instructions

Operating Instructions

Operating Instructions

Operating Instructions

Room

If you still require assistance, please submit a Classroom Emergency.

Deleting...