Updating...
Skip to main content
(opens in a new tab)
Filter your search by category. Current category:
All
All
Knowledge Base
Service Catalog
Search the client portal
Search
Sign In
Show Applications Menu
ITS Portal
Sign In
Search
Home
Student Support
Employee Support
Services
Knowledge Base
More Applications
Skip to Knowledge Base content
Search
Articles
Blank
Knowledge Base
Classroom Technology Guides
OM - Old Main
OM2422 Flexible Classroom
OM2422 Flexible Classroom
Tags
Old-Main
OM
OM2422
Flexible-Classroom
User Device Support
Projecting via USB-C
Device List
Room PC
Operating Instructions
Power On
– Press the power button.
Log in
- Using your TRU Email address and Network Password
Troubleshooting
Power On
– Press the power button.
Check Connections
– Ensure all cables are securely plugged into the back of the computer (excluding Laptop HDMI).
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Monitor
Troubleshooting
Power On
– Press the power button.
Power Room PC On
– Press the power button on the Room PC.
Troubleshooting
Power On
– Press the power button.
Check Connections
– Ensure all cables are securely plugged into the back of the monitor (excluding Laptop HDMI).
Set Display Mode
– Ensure the monitor is set to
Auto Detect
in display settings.
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Main Projector
Operating Instructions
Power On
– Press
Projector On
on the Touch Panel.
Select Output Source
Troubleshooting
Power On
– Press
Projector On
on the Touch Panel.
Power Smart Monitor On
- Press the power button on the smart podium -
This device MUST be on for room to receive display input.
Disable Mute
– Turn
Picture Mute
off on the Touch Panel.
Select Output Source
Adjust Display
– Settings > Display > Under the Detected Displays, Change to Duplicate These Displays > Keep Changes
Restart Projector
– Press
Projector Off
, wait 10 seconds, then press
Projector On
.
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
TV
Operating Instructions
Power On
– Press
TV/Projector On
on the Touch Panel.
Select Ouput Source
Troubleshooting
Power On
– Press
TV/Projector On
on the Touch Panel.
Disable Mute
– Turn
Picture Mute
off on the Touch Panel.
Select Output Source
Adjust Display
– Settings > Display > Under the Detected Displays, Change to Duplicate These Displays > Keep Changes
Restart TV
– Press
TV/
Projector Off
, wait 10 seconds, then press
TV/
Projector On
.
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Touch Panel
Operating Instructions
Start Touch Panel
- To begin, start by tapping the screen, then selecting
Press Button to Power On System
Video Source Control
- Choose desired video source on each display
For no display, use the
Video Mute Control
to select which display you would like disabled
Audio Control
- Control volume of speakers
For no audio, use the
Mute button
at the bottom of the screen
Camera Control
- Select one of the
Camera Presets
to change the camera angle.
Troubleshooting
Restart the Touch Panel
–
Press the power button > Confirm Power Off > Tap Screen to Begin.
Room Audio
Operating Instructions
Adjust Volume
– Turn up the sound on the Touch Panel and Room PC.
Troubleshooting
Adjust Volume
– Turn up the sound on the Touch Panel and Room PC.
Disable Mute
– Turn
Audio Mute
off on the Touch Panel and Room PC.
Check Output
– In
Settings > Sound
, set the output device to the designated
Room Audio Device
.
Check Cable
– Ensure the audio cable is securely plugged into the back of the Room PC.
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Room Microphone
Operating Instructions
Begin Meeting
– Open the video conferencing software of your choice (Zoom or Teams)
Enable Webcam in Software
Troubleshooting
Adjust Volume
– In
Settings > System > Sound
, and adjust the
Volume.
Disable Mute
– In
Settings > System > Sound
, under
Volume
ensure it is not muted by
clicking
on the
Microphone Symbol.
Check Input
– In
Settings > System > Sound
, set the input device to the designated
Room Audio Device
.
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Webcam
Operating Instructions
Begin Meeting
– Open the video conferencing software of your choice (Zoom or Teams)
Enable Webcam in Software
Troubleshooting
Verify Camera Selected in Touch Panel
–
Select desired camera to be shown in Camera Presets >
Only one can be active at a time
Verify Detection
– In
Settings > Bluetooth & Devices > Devices
, confirm the webcam is detected.
Select in Software
– Ensure the webcam is chosen as the camera in your conferencing application.
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Document Camera
Operating Instructions
Turn On
– Press the power button on the Operating Panel
Other Options:
Zoom
– Use [Zoom In/Out] buttons on the Operating Panel.
Focus
– Press Focus button to auto-focus.
Brightness
– Use [Brighten/Darken] buttons on panel or remote.
Troubleshooting
Restart Document Camera
– Press and hold the power button for 3 seconds, press the power button again
Select Source
– press
Document Camera
on the Touch Panel
Check Connections
– Ensure all cables are securely plugged into the back of the device (excluding Laptop HDMI).
Room
Front
Instructor Station
If you still require assistance, please submit a
Classroom Emergency
.
Sign in to leave feedback
0 reviews
Blank
Blank
Blank
Blank
Print Article
Deleting...