Print
Print:
Body
OM1791 Standard Classroom
Body
User Device Support
Projecting via HDMI
Device List
Room PC
Operating Instructions
Power On
– Press the power button.
Log in
- Using your TRU Email address and Network Password
Troubleshooting
Power On
– Press the power button.
Check Connections
– Ensure all cables are securely plugged into the back of the computer (excluding Laptop HDMI).
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Monitor
Troubleshooting
Power On
– Press the power button.
Power Room PC On
– Press the power button on the Room PC.
Troubleshooting
Power On
– Press the power button.
Check Connections
– Ensure all cables are securely plugged into the back of the monitor (excluding Laptop HDMI).
Set Display Mode
– Ensure the monitor is set to
Auto Detect
in display settings.
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Main Projector
Operating Instructions
Power On
– Press
Projector On
on the Touch Panel.
Select Source
:
For
Room PC
, press
Room PC
on the Touch Panel.
For
Personal Laptop
, press
Laptop HDMI
on the Touch Panel.
For
Document Camera,
press
Document Camera
on the Touch Panel
Troubleshooting
Power On
– Press
Projector On
on the Touch Panel.
Disable Mute
– Turn
Picture Mute
off on the Touch Panel.
Select Source
:
For
Room PC
, press
Room PC
on the Touch Panel.
For
Personal Laptop
, press
Laptop HDMI
on the Touch Panel.
For
Document Camera,
press
Document Camera
on the Touch Panel
Adjust Display
– Settings > Display > Under the Detected Displays, Change to Duplicate These Displays > Keep Changes
Restart Projector
– Press
Projector Off
, wait 10 seconds, then press
Projector On
.
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Touch Panel
Operating Instructions
Press
the display power button
Select
the source you would like to display
Other Options:
Picture Mute
– Stops displaying the screen
Volume
–
Control volume level
Room Audio
Operating Instructions
Adjust Volume
– Turn up the sound on the Touch Panel and Room PC.
c
Troubleshooting
Adjust Volume
– Turn up the sound on the Touch Panel and Room PC.
Disable Mute
– Turn
Audio Mute
off on the Touch Panel and Room PC.
Check Output
– In
Settings > Sound
, set the output device to the designated
Room Audio Device
.
Check Cable
– Ensure the audio cable is securely plugged into the back of the Room PC.
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Webcam
Operating Instructions
Begin Meeting
– Open the video conferencing software of your choice (Zoom or Teams)
Enable Webcam in Software
Troubleshooting
Check Connection
– Plug the webcam into the back of the Room PC.
Verify Detection
– In
Settings > Bluetooth & Devices > Devices
, confirm the webcam is detected.
Select in Software
– Ensure the webcam is chosen as the camera in your conferencing application.
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Document Camera
Operating Instructions
Turn on
– Press and hold [Power] until green LED appears.
Turn off
–: Hold [Power] for 3 seconds.
Zoom
– Use control panel or remote.
Auto-Focus
– Press [AF] to adjust focus.
Light
– Toggle LED overhead light with [Lamp].
c
Troubleshooting
Restart Document Camera
– Press and hold the power button for 3 seconds, press the power button again.
Select Source
– press
Document Camera
on the Touch Panel
Check Connections
– Ensure all cables are securely plugged into the back of the device (excluding Laptop HDMI).
Microphone
Operating Instructions
Press
the power button
Troubleshooting
Power Cycle
– Press the power button, wait 3 seconds, press the power button again
TV
Operating Instructions
Power On
–
Press
power button
at bottom of TV.
Select Source
:
Wall-mounted control unit allows selection of computers on desk in front of TV.
Number on control unit will refer to number on monitors.
Press and hold
"Panel Lock" to disable locked state.
Troubleshooting
Power On
–
Press
power button,
at bottom of TV.
Select Source
:
Wall mounted control unit allows selection of computers on desk infront of TV.
Number on control unit will refer to number on monitors.
Press and hold
"Pannel Lock" to disable locked state.
Adjust Display
– Settings > Display > Under the Detected Displays, Change to Duplicate These Displays > Keep Changes
Restart TV
–
Press
power button,
at bottom of TV, wait 10 seconds, then p
ress
power button,
at bottom of TV.
Restart the Controller
Restart the PC
–
Windows Start Menu > Power > Restart.
If restart fails, hold the power button until the light turns off, wait 5 seconds, then press it again.
Room
Front
Instructor Station
If you still require assistance, please submit a
Classroom Emergency
.
Details
Details
Article ID:
13167
Created
Tue 8/5/25 11:20 AM
Modified
Fri 11/7/25 3:11 PM